Categories

Category 7  S/FTP 100 Ohm 
- Data and computer cable for outdoor installations in local area networks, 600 MHz Maximize

Category 7 S/FTP 100 Ohm 
- Data and computer cable for outdoor installations in local area networks, 600 MHz

Category 7  S/FTP 100 Ohm - Construction

Basic Conductor                       : solid, 23 AWG bare annealed copper.
Insulation                                : polyolefin.
Number of insulated conductors : 8, twisted in 4 pairs.
Individual pair shield                  : polyester-aluminum foil (foil face out).
Overall shield                           : tin coated copper braid.
Outer Jacket                           : heavy-duty, black, UV-resistant
                                               PVC compound for outdoor use.
Short Term Bend Radius           : 8xOD mm.
Long Term Bend Radius            : 4xOD mm.
Operating temperature             : -20 to +60° C.
Installation temperature            : 0 to +50° C.
Flame Test                              : IEC 60332-1.

More details

Category 7  S/FTP 100 Ohm - Technical Data and Tests
Characteristic Impedance            : 100±5 Ohm @ 1-600 MHz.
DC Resistance                           : 93.0 Ohm/Km max.
Resistance unbalance                 : 2% max.
Capacitance                              : 45 pF/m nom. @ 1 KHz.
Cap. Unbalance (wire to ground) : 1500 pF/Km max. @ 1 KHz.
Voltage rating                           : 72 Vdc max.
Dielectric strength                     : 700 Volts/1 minute min rms.
Velocity of Propagation (NVP)     : 77-80%.
Propagation delay                      : 500+36/f1/2@ 1-600 MHz..
Delay Skew                              : 25 nS/100m max @ 1-600 MHz.
Insulation Resistance                  : 5000 MegaOhm•Km min. @ 500 Vdc.
Coupling attenuation                  : 85 dB min @ 30-100 MHz 85-20Log(f/100) @100-600 MHz.
Screening Attenuation               : 60 dB min @ 30-600 MHz.
Transfer Impedance                   : 10 mOhm/m max @ 1-30 MHz 30 MOhm/m max @ 30-100 MHz.
 


CAT 7 S/FTP 100 Ohm outdoor LAN cables are tested and verified for full compliance with the following standards
Category 7 according to IEC 61156-5 (for ISO/IEC-11801) 
600 MHz according to CENELEC EN 50288-4

Category 7  S/FTP 100 Ohm - Applications
CAT 7 outdoor cable series consists of 100 Ohm impedance, 4-pair and 8-pair S/FTP cables jacketed with heavy-duty, black, UV-resistant PE compound for horizontal outdoor installations in local area networks (LANs).
All cables fully conform to and provide a substantial margin above all Category 7 requirements of IEC 61156-5 (Specified in ISO/IEC 11801) and are tested up to 600 MHz.
 


CAT 7 S/FTP 100 Ohm outdoor LAN  cables support all presently available and future LAN applications, including the following protocols
● Broadband Digital and Analog CATV signals up to 600 MHz;      ● 100BASE-TX;
● SOHO and multiple simultaneous applications on all 4 pairs;       ● Token Ring 100 Mbps;
● 10GBASE-T 10 Gigabit Ethernet;                                          ● ATM 52;
● 1000BASE-T 1 Gigabit Ethernet;                                          ● ATM 25;
● ATM 155;                                                                         ● 10BASE-T Ethernet;
● TP-PMD;                                                                           ● Token Ring 4 Mbps and 16 Mbps;
● 100BASE-T "Fast Ethernet";                                                ● Broadband and Baseband Video;
● 100BASE-T2;                                                                    ● ISDN Basic and Primary Access;
● 100BASE-T4;                                                                    ● 1BASE-5 Starlan;
● ITU V.21 and X.11;                                                            ● ISALAN.

All Rights Reserved Halley Cables © 2006 - 2024