Category 7+ S/FTP 100 Ohm  - Data and computer LAN cable for horizontal installation, tested at 600, 1000 and 1200 MHz

Category 7+ S/FTP 100 Ohm - Construction

Basic Conductor : solid, 23AWG bare annealed copper

Insulation : polyolefin

No. of insulated conductors : 8, twisted in 4 pairs

Individual pair shield : polyester-aluminum foil (foil face out),

providing 100% coverage

Overall shield : tin coated copper braid laid in close contact

over the inner foils

Outer Jacket : LSZH Halogen free flame retardant or

PVC compound

Operating temperature : -20 to +60° C

Installation temperature : 0 to +50° C

More details

More info
Complete View / Download PDF

Category 7+ S/FTP 100 Ohm - Technical Data and Test

Flame Test : IEC 60332-1, IEC 60332-3-24 or IEC 60332-3-25.

Conductor Size Test : UL 444.

LSZH cables tests : IEC 60754 (gas) & IEC 61034 (smoke).

Characteristic Impedance : 100±5 Ohm @ 1-600 MHz, @ 1-1000 Mhz, @ 1-1200 Mhz. 

DC Resistance : 93.0 Ohm/Km max.

 Resistance unbalance : 2% max. 

Capacitance : 45 pF/m nom. @ 1 KHz. 

Cap. Unbalanced (wire to ground) : 1500 pF/Km max. @ 1 KHz.

 Voltage rating : 72 Vdc max. 

Dielectric strength : 700 Volts/1 minute min rms.

 Velocity of Propagation (NVP) : 77-80%. 

Propagation delay : 500+36/f1/2, @ 1-1000 Mhz, @ 1-1200 Mhz. 

Delay Skew : 25 nS/100m max @ 1-600 MHz, @ 1-1000 Mhz, @ 1-1200 Mhz.

 Insulation Resistance : 5000 MegaOhm*Km min. @ 500 Vdc. 

Coupling attenuation : 85 dB min @ 30-100 MHz 85-20Log(f/100) @100-600 MHz.

 Screening Attenuation : 60 dB min @ 30-600 MHz. 

Transfer Impedance : 10 mOhm/m max @ 1-30 MHz 30 MOhm/m max @ 30-100 MHz.

CAT 7+ S/FTP 100 Ohm Horizontal LAN cables are tested and verified for full compliance with the following standards

Category 7 according to IEC 61156-5 (for ISO/IEC-11801).

600 MHz according to CENELEC EN 50288-4.

CAT 7+ S/FTP 100 Ohm - Applications

CAT 7 cable series consists of 100 Ohm impedance, 4-pair and 8-pair S/FTP cables for horizontal installations in local area networks (LANs).

All cables fully conform to and provide a substantial margin above all Category 7 requirements of IEC 61156-5 (Specified in ISO/IEC 11801) and are tested up to 600, 1000 and 1200 MHz.

CAT 7+ S/FTP 100 Ohm Horizontal LAN cables support all presently available and future LAN applications, including the following protocols

● Broadband Digital and Analog CATV signals up to 1200 MHz; ● 100BASE-TX;

● SOHO and multiple simultaneous applications on all 4 pairs; ● Token Ring 100 Mbps;

● 10GBASE-T 10 Gigabit Ethernet; ● ATM 52;

● 1000BASE-T 1 Gigabit Ethernet; ● ATM 25;

● ATM 155; ● 10BASE-T Ethernet;

● TP-PMD; ● Token Ring 4 Mbps and 16 Mbps;

● 100BASE-T "Fast Ethernet"; ● Broadband and Baseband Video;

● 100BASE-T2; ● ISDN Basic and Primary Access;

● 100BASE-T4; ● 1BASE-5 Starlan;

● ITU V.21 and X.11; ● ISALAN.

Category 7+ S/FTP 100 Ohm  - Data and computer LAN cable for horizontal installation, tested at 600, 1000 and 1200 MHz

Category 7+ S/FTP 100 Ohm - Data and computer LAN cable for horizontal installation, tested at 600, 1000 and 1200 MHz

Category 7+ S/FTP 100 Ohm  - Data and computer LAN cable for horizontal installation, tested at 600, 1000 and 1200 MHz