Category 7A(+) S/FTP 100 Ohm - Data and computer horizontal LAN cable, tested up to 1000, 1200, 1500 MHz

Category 7A(+) S/FTP 100 Ohm - Construction

Basic Conductor : solid, 22 AWG, bare annealed copper

Insulation : polyolefin

No. of insulated conductors : 8, twisted in 4 pairs

Individual pair shield : Polyester-aluminum foil (foil face out)

providing 100% coverage

Overall shield : tin coated copper braid, laid in close

contact over the inner foil

Outer Jacket : LSZH Halogen free flame retardant

or PVC compound

Operating temperature : -20° to + 60° C

Installation temperature : 0° to + 50° C

More details

More info
Complete View / Download PDF

Category 7A(+) S/FTP 100 Ohm - Technical data and tests

Flame Test : IEC 60332-1, IEC 60332-3-24 or IEC 60332-3-25.

Conductor Size Test : UL 444.

LSZH cables gas & smoke tests : IEC 60754 (gas) & IEC 61034 (smoke).

Characteristic Impedance : 100±5 Ohm @ 1-1000 MHz, @ 1-1200 MHZ, @ 1-1500 MHz. 

DC Resistance : 93.0 Ohm/Km max. 

Resistance unbalance : 2% max. 

Capacitance : 45 pF/m nom. @ 1 KHz. 

Cap. Unbalance (wire to ground) : 1500 pF/Km max. @ 1 KHz.

 Voltage rating : 72 Vdc max. 

Dielectric strength : 700 Volts/1 minute min rms.

 Velocity of Propagation (NVP) : 77-80% @ 1-1000 MHz, @ 1-1200 MHZ, @ 1-1500 MHz. 

Propagation delay : 534+36/f1/2 nS/100m max. @ 1-1000 MHz, @ 1-1200 MHZ, @ 1-1500 MHz. 

Delay Skew : 25 nS/100m max @ 1-1000 MHz, @ 1-1200 MHZ, @ 1-1500 MHz.

 Insulation Resistance : 5000 MegaOhm•Km min. @ 500 Vdc.

 Coupling attenuation : 85 dB min @ 30-100 MHz 85-20Log(f/100) @100-1000 MHz. 

Screening Attenuation : 60 dB min @ 30-1000 MHz. 

Transfer Impedance : 10 mOhm/m max @ 1-30 MHz 30 MOhm/m max @ 30-100 MHz.

Category 7A(+) S/FTP 100 Ohm cables are tested and verified for full compliance with the following standards

IEC 61156-5 (for ISO/IEC-11801 2nd Edition).

Category 7A(+) S/FTP 100 - Applications

 This horizontal LAN cable series consists of 100 Ohm impedance, 4-pair and 8-pair S/FTP cables for horizontal installations in local area networks (LANs).

All cables fully conform to and provide a substantial margin above all Category 7A requirements of IEC 61156-5 (Specified in ISO/IEC 11801) and are tested up to 1000, 1200 and 1500 MHz.

Category 7A+ S/FTP 100 Ohm Horizontal cables support all presently available and future LAN applications, including the following protocols

● Broadband Digital and Analog CATV signals up to 1500 MHz; ● 100BASE-TX;

● SOHO and multiple simultaneous applications on all 4 pairs; ● Token Ring 100 Mbps;

● 10GBASE-T 10 Gigabit Ethernet; ● ATM 52;

● 1000BASE-T 1 Gigabit Ethernet; ● ATM 25;

● ATM 155; ● 10BASE-T Ethernet;

● TP-PMD; ● Token Ring 4 Mbps and 16 Mbps;

● 100BASE-T "Fast Ethernet"; ● Broadband and Baseband Video;

● 100BASE-T2; ● ISDN Basic and Primary Access;

● 100BASE-T4; ● 1BASE-5 Starlan;

● ISALAN; ● ITU V.21 and X.11.

Category 7A(+) S/FTP 100 Ohm - Data and computer horizontal LAN cable, tested up to 1000, 1200, 1500 MHz