Category 7B(+) S/FTP 100 Ohm   - Data and computer cable tested up to 1500 MHz (including 1200 MHz)

Category 7B(+) S/FTP 100 Ohm - Construction

Basic Conductor : solid 22 AWG bare annealed copper

Insulation : polyolefin

Number of insulated conductors : 8, twisted in 4 pairs

Individual pair shield : Polyester-aluminum foil (foil face out),

providing 100% coverage

Overall shield : tin coated copper braid, laid in close

contact over the inner foils

Outer Jacket : LSZH Halogen free flame retardant or

PVC compound

Operating temperature : -20° to +60° C

Installation temperature : 0° to +50° C

More details

More info
Complete View / Download PDF

Category 7B(+) S/FTP 100 Ohm - Construction

Flame Test : IEC 60332-1, IEC 60332-3-24 or IEC 60332-3-25.

Conductor Size Test : UL 444.

LSZH cables gas & smoke tests : IEC 60754 (gas) & IEC 61034 (smoke).

Characteristic Impedance : 100±5 Ohm , @ 1-1200 MHz, @ 1-1500 MHz

DC Resistance : 93.0 Ohm/Km max.

Resistance unbalance : 2% max.

Capacitance : 45 pF/m nom. @ 1 KHz

Cap. Unbalance (wire to ground) : 1200 pF/Km max. @ 1 KHz.

Voltage rating : 72 Vdc max.

Dielectric strength : 700 Volts/1 minute min rms

Velocity of Propagation (NVP) : 77-80%

Propagation delay : 500+36/f½, @ 1-1200 MHz, @ 1-1500 MHz.

Delay Skew : 25 nS/100m max, @ 1-1200 MHz, @ 1-1500 MHz.

Insulation Resistance : 5000 MegaOhm•Km min. @ 500 Vdc

Coupling attenuation : 85 dB min @ 30-100 MHz 85-20Log(f/100) @100-1200 MHz

Screening Attenuation : 60 dB min @ 30-1200 MHz

Transfer Impedance : 10 mOhm/m max @ 1-30 MHz 30 MOhm/m max @ 30-100 MHz.

Category 7B(+) S/FTP cables are tested and verified for full compliance with the following standards

IEC 61156-7 Symmetrical Pair/Quad cables for digital and analog communications with transmission characteristics up to 1200 MHz.

Category 7 according to IEC 61156-5 (for ISO/IEC-11801 2nd Edition).600 MHz according to CENELEC EN 50288-4.

Category 7B(+) S/FTP cables - Applications

 Category 7B(+) S/FTP cable series consists of 100 Ohm impedance, 4-pair and 8-pair S/FTP cables. All cables fully conform to and provide a substantial margin above all transmission requirements of IEC 61156-7 (Symmetrical Pair/Quad cables for digital and analog communications with transmission characteristics up to 1200 MHz), tested up to 1500MHz.

Category 7B(+) S/FTP cables support all presently available and future LAN applications, including the following
● Broadband Digital and Analog CATV signals up to 1500 MHz; ● 100BASE-TX;

● SOHO and multiple simultaneous applications on all 4 pairs; ● Token Ring 100 Mbps;

● 10GBASE-T 10 Gigabit Ethernet; ● ATM 52;

● 1000BASE-T 1 Gigabit Ethernet; ● ATM 25;

● ATM 155 TP-PMD; ● 10BASE-T Ethernet;

● 100BASE-T "Fast Ethernet"; ● Token Ring 4 Mbps and 16 Mbps;

● 100BASE-T2; ● Broadband and Baseband Video;

● 100BASE-T4; ● ISDN Basic and Primary Access;

● 1BASE-5 Starlan; ● ISALAN.

● ITU V.21 and X.11;

Category 7B(+) S/FTP 100 Ohm   - Data and computer cable tested up to 1500 MHz (including 1200 MHz)

Category 7B(+) S/FTP 100 Ohm - Data and computer cable tested up to 1500 MHz (including 1200 MHz)

Category 7B(+) S/FTP 100 Ohm   - Data and computer cable tested up to 1500 MHz (including 1200 MHz)