RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH - Silicone insulated, collective screened, HFFR sheathed instrumentation cable 500 V

Construction

 Conductor : stranded copper wires, class 2. 

Insulation : special silicone rubber compound.

Triple : three conductors twisted to a triple. 

Lay-up : triples laid up in layers of optimum pitch.

Separator : polyester tape.

Screen : AL-PES tape over stranded tinned copper

drain wire 0,50 mm². 

Outer sheath : HFFR compound.

Sheath colour : RAL 9005, black or RAL 5015, blue.

Core identification : black / blue / red cores numbered 1-1-1, 2-2-2,…

Upon request colour coded acc. to IEC 60189-2.

More details

More info
Complete View / Download PDF

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH - Silicone insulated, collective screened, HFFR sheathed instrumentation cable 500 V

Technical data and tests

Rated voltage : 500 V.

Test voltage : Urms core-core : 2000 V;

  Urms core-screen : 2000 V.

Temperature range : operation : - 30° C ~ + 90° C;

installation : - 5° C ~ + 50° C.

Min. bending radius: 7.5 x D.

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH - Silicone insulated, collective screened, HFFR sheathed instrumentation cable 500 V

Technical data and tests

Conductor resistance (20° C) : 0,50 mm² : 36,7 Ω/km;

0,75 mm² : 25,0 Ω/km;

1,0 mm² : 18,5 Ω/km;

1,3 mm² : 14,2 Ω/km;

1,5 mm² : 12,3 Ω/km.

Insulation resistance (20° C) : min. 300 MΩ/km.

Mutual capacitance (1 kHz) : max. 100 pF/m.

 Capacitance unbalanced : max. 500 pF/500 m (1 kHz).

L / R (ratio) (max.) : ≤ 4 pairs all other pairs 

0,50 mm² : max. 150 pF/m; max. 100 pF/m; 

0,75 mm² : max. 150 pF/m; max. 100 pF/m;

1,0 mm² : max. 150 pF/m; max. 100 pF/m; 

1,3 mm² : max. 165 pF/m; max. 120 pF/m;

1,5 mm² : max. 165 pF/m. max. 120 pF/m.

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH - Silicone insulated, collective screened, HFFR sheathed instrumentation cable 500 V

Standards

 Design : EN 50288-7. 

Conductor : IEC 60228 class 2, DIN EN 60228 class 2. 

Outer sheath : EN 50290-2-27.

 Flame test : IEC 60332-1 & DIN EN 60332-1.

IEC 60332-3 & DIN EN 50266-2-4.

Smoke density : IEC 61034-2 & DIN EN 61034-2.

Halogen-free : IEC 60754-1/2 & DIN EN 50267-2. 

Circ. integrity (CI) : IEC 60331, VDE 0472-814;  BS 6387 cat. CWZ.

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH - Silicone insulated, collective screened, HFFR sheathed instrumentation cable 500 V

Applications

These cables are used for transmission of analogue and digital signals in instrumentation and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc...

These cables are used in a fixed operating mode, and can continue the supply of power under existing fire conditions and in environments which have no corrosive gases emitted in the event of fire.

In case of fire, these cables inhibit the propagation of the flames and the development of smoke is extremely low.

Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.

With blue sheath it is suitable for intrinsically safe systems.

These cables are not recommended for direct burial.

They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

RE-2G(St)H-CI FE180 90° C  - Silicone insulated, collective screened, HFFR sheathed instrumentation cable (500 V)

RE-2G(St)H-CI FE180 90° C - CU/SH/OSCR/LSZH

RE-2G(St)H-CI FE180 90° C  - CU/SH/OSCR/LSZH