RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH - PE insulated, screened, HFFR sheathed instrumentation cable 500 V

Construction

Conductor : plain copper wire, stranded.

 Insulation : PE compound (RE-2Y...). 

Triple : three conductors twisted to a triple.

TIMF construction : polyester tape above the triple, AL-PES tape over

solid tinned copper drain wire, 0,60 mm.

Separator : polyester tape.

Screen : AL-PES tape over stranded tinned copper drain

wire 0,50 mm². 

Outer sheath : HFFR compound. 

Sheath colour : RAL 9005, black or RAL 5015, blue.

*Please check the data sheet for detailed information.

More details

More info
Complete View / Download PDF

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH - PE insulated, screened, HFFR sheathed instrumentation cable 500 V

Technical data and tests

Rated voltage : 500 V.

Test voltage : Urms core-core : 2000 V; 

Urms core-screen : 2000 V.

Temperature range : operation : - 30° C ~ + 70° C;

installation : - 5° C ~ + 50° C.

Min. bending radius: 7.5 x D

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH - PE insulated, screened, HFFR sheathed instrumentation cable 500 V

Technical data and tests

Conductor resistance : 0,50 mm² : 36,7 Ω/km;

0,75 mm² : 25,0 Ω/km;

1,0 mm² : 18,5 Ω/km;

1,3 mm² : 14,2 Ω/km;

1,5 mm² : 12,3 Ω/km.

Insulation resistance : min. 5000 MΩ/km.

Mutual capacitance : max. 100 pF/m.

L / R (ratio) (max.) : 0,50 mm² : 25 µH/Ω;

0,75 mm² : 25 µH/Ω;

1,0 mm² : 25 µH/Ω; 

1,3 mm² : 40 µH/Ω;

1,5 mm² : 40 µH/Ω.

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH - PE insulated, screened, HFFR sheathed instrumentation cable 500 V

Standards

 Design : EN 50288-7. 

Conductor : IEC 60228 class 2, DIN EN 60228 class 2.

 Insulation : EN 50290-2-23.

Outer sheath : EN 50290-2-27. 

Flame test : IEC 60332-1 & DIN EN 60332-1;

IEC 60332-3 & DIN EN 50266-2-4.

Smoke density : IEC 61034-2 & DIN EN 61034-2.

Halogen-free : IEC 60754-1/2 & DIN EN 50267-2.

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH - PE insulated, screened, HFFR sheathed instrumentation cable 500 V

Applications

These cables are used for transmission of analogue and digital signals in instrumentation and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc...

These cables are used in the environments which must have no corrosive gases emitted in the event of fire.

In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low.

Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.

With blue sheath it is suitable for intrinsically safe systems.

These cables are not recommended for direct burial.

They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

RE-2Y(St)H-TIMF 70° C  - PE insulated, screened, HFFR sheathed instrumentation cable (500 V)

RE-2Y(St)H-TIMF 70° C - CU/PE/ISCR/OSCR/LSZH

RE-2Y(St)H-TIMF 70° C  - CU/PE/ISCR/OSCR/LSZH