RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC

RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC - PVC insulated, screened, armoured, PVC sheathed instrumentation cable 300 V

Construction

Conductor : plain copper wire, stranded.

 Insulation : PVC compound, 105° C.

 PIMF Construction : polyester tape above the pair, AL-PES tape over solid

tinned copper drain wire, 0,60 mm.

Separator : polyester tape.

Screen : AL-PES tape over stranded tinned copper drain

wire 0,50 mm².

 Inner/outer sheath : PVC compound, 105° C.

 Armour : galvanized round steel wire. 

 Sheath colour : RAL 9005, black or RAL 5015, blue.

* Complete information available in the data sheet of this cable.

More details

More info
Complete View / Download PDF

RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC - PVC insulated, screened, armoured, PVC sheathed instrumentation cable 300 V

Technical data and tests

Rated voltage : 300 V. 

Test voltage : Urms core-core : 1500 V;

  Urms core-screen : 1500 V.

 Temperature range : operation : - 30° C ~ + 105° C;

  installation : - 5° C ~ + 50° C. 

Min. bending radius : 10 x D.

 Insulation resistance : min. 100 MΩ/km.

 RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC - PVC insulated, screened, armoured, PVC sheathed instrumentation cable 300 V

Technical data and tests

Capacitance unbalanced : (1 kHz) : max. 500 pF/500 m.

Insulation thickness : 0,50 mm² : 0,40 mm;

0,75 mm² : 0,40 mm;

  1,0 mm² : 0,40 mm;

  1,3 mm² : 0,45 mm;

1,5 mm² : 0,45 mm. 

Conductor resistance : 0,50 mm² : 36,7 Ω/km;

  0,75 mm² : 25,0 Ω/km; 

1,0 mm² : 18,5 Ω/km;

1,3 mm² : 14,2 Ω/km; 

1,5 mm² : 12,3 Ω/km. 

L/R (ratio) (max) : 0,50 mm² : 25 µH/Ω;

0,75 mm² : 25 µH/Ω; 

1,0 mm² : 25 µH/Ω; 

1,3 mm² : 40 µH/Ω;

1,5 mm² : 40 µH/Ω. 

Mutual capacitance (1 kHz) : 0,50 mm² : max. 190 pF/m;

0,75 mm² : max. 190 pF/m;

1,0 mm² : max. 190 pF/m;

1,3 mm² : max. 200 pF/m;

1,5 mm² : max. 200 pF/m.

RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC - PVC insulated, screened, armoured, PVC sheathed instrumentation cable 300 V

Standards

Design : DIN EN 50288-7. 

Conductor : IEC 60228 class 2, DIN EN 60228 class 2.

 Insulation : EN 50290-2-21. 

Inner/outer sheath : EN 50290-2-22.

 Armour : EN 10257-1. 

Flame retardancy : IEC 60332-1 & EN 60332-1.

RE-Yw(St)YwSWAYw-fl-PIMF 105° C - CU/PVC/OSCR/PVC/SWA/PVC - PVC insulated, screened, armoured, PVC sheathed instrumentation cable 300 V

Applications

These cables are used for transmission of analogue and digital signals in instrumentation and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc... .

Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.

With blue sheath it is suitable for intrinsically safe systems.

The armour above the inner sheath protects the cable from mechanical shocks.

These cables are not recommended for direct burial.

They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

RE-Yw(St)YwSWAYw-fl-PIMF - PVC insulated, screened, armoured, PVC sheathed instrumentation cable (300 V)