+40 746 887 887
+40 236 319 085
office@halleycables.com

Categories

Home > Signal, Control & Instrumentation>RE-Yw(St)Yw-fl-PIMF 105° C

 - CU/PVC/ISCR/OSCR/PVC

RE-Yw(St)Yw-fl-PIMF 105° C

 - CU/PVC/ISCR/OSCR/PVC
 Maximize

RE-Yw(St)Yw-fl-PIMF 105° C

 - CU/PVC/ISCR/OSCR/PVC


RE-Yw(St)Yw-fl-PIMF   105° C
 - CU/PVC/ISCR/OSCR/PVC
 - PVC insulated, screened, PVC sheathed instrumentation cable 500 V
 
Construction
 

Conductor           : plain copper wire, stranded.

Insulation            : PVC compound, 105° C.
Core identification : black / blue, with numbered tape under separator
                            tape of the pair screen.
PIMF Construction : polyester tape above the pair, AL-PES tape over
                            solid tinned copper drain wire, 0,60 mm.
Separator             : polyester tape.
Screen                 : AL-PES tape over stranded tinned copper
                            drain wire 0,50 mm².
Outer sheath         : PVC compound, 105° C.
Sheath colour       : RAL 9005, black or RAL 5015, blue.

More details

RE-Yw(St)Yw-fl-PIMF   105° C

 - CU/PVC/ISCR/OSCR/PVC
 - PVC insulated, screened, PVC sheathed instrumentation cable 500 V
 
Technical data and tests


Rated voltage             : 500 V.

Test voltage               : Urms core-core    : 2000 V;
                               
   Urms core-screen : 2000 V.
Temperature range      : operation : - 30° C ~ + 105° C;
                                 installation : - 5° C ~ + 50° C.
Min. bending radius     : 7,5 x D.

Insulation resistance     : min. 100 MΩ/km.

Capacitance unbalance : (1 kHz) : max. 500 pF/500 m.
 
RE-Yw(St)Yw-fl-PIMF   105° C
 - CU/PVC/ISCR/OSCR/PVC
 - PVC insulated, screened, PVC sheathed instrumentation cable 500 V
 
Technical data and tests

 
Conductor resistance  : 0,50 mm² : 36,7 Ω/km;
                                0,75 mm² : 25,0 Ω/km;
                                  1,0 mm² : 18,5 Ω/km;
                                  1,3 mm² : 14,2 Ω/km;
                                  1,5 mm² : 12,3 Ω/km.
Mutual Capacitance    : 0,50 mm² : max. 190 pF/m;
                                0,75 mm² : max. 190 pF/m;
                                  1,0 mm² : max. 190 pF/m;
                                  1,3 mm² : max. 200 pF/m;
                                  1,5 mm² : max. 200 pF/m.
L / R (ratio) (max.)    : 0,50 mm² : 25 µH/Ω;
                                0,75 mm² : 25 µH/Ω;
                              
    1,0 mm² : 25 µH/Ω;
                              
    1,3 mm² : 40 µH/Ω;
                              
    1,5 mm² : 40 µH/Ω; 
 
RE-Yw(St)Yw-fl-PIMF   105° C

 - CU/PVC/ISCR/OSCR/PVC
 - PVC insulated, screened, PVC sheathed instrumentation cable 500 V
 
Standards
 
Design                     : DIN EN 50288-7.

Insulation                 : EN 50290-2-21.

Conductor                : IEC 60228 class 2, DIN EN 60228 class 2.

Outer sheath             : EN 50290-2-22.

Flame retardance test : IEC 60332-1 & EN 60332-1.
 
RE-Yw(St)Yw-fl-PIMF   105° C
 - CU/PVC/ISCR/OSCR/PVC
 - PVC insulated, screened, PVC sheathed instrumentation cable 500 V
 
Applications


These cables are used for transmission of analogue and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc... .
Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.
With blue sheath it is suitable for intrinsically safe systems.
These cables are not recommended for direct burial.
They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

All Rights Reserved Halley Cables © 2006 - 2024