RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Construction

Conductor : plain copper wire, stranded.

 Insulation : XLPE compound, (RE-2X….). 

Core identification : black / blue / red cores are numbered (1-1-1, 2-2-2,…).

Upon request : colour coded according to IEC 60189-2. 

Separator : polyester tape.

 Screen : AL-PES tape over tinned copper drain wire 0,50 mm².

 Inner sheath : PVC compound, 90° C.

Armour : galvanized round steel wire. 

Outer sheath : PVC compound, 90° C.

 Sheath colour : RAL 9005, black or RAL 5015, blue.

More details

More info
Complete View / Download PDF

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Technical Data and Tests

 Rated voltage : 500 V.

 Test voltage : Urms core-core : 2000 V;

  Urms core-screen : 2000 V.

 Temperature range : operation : - 30° C ~ + 90° C;

installation : - 5° C ~ + 50° C.

Min. bending radius : 10 x D.

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Technical data and tests

Conductor resistance (20° C) : 0,50 mm² : 36,7 Ω/km;

  0,75 mm² : 25,0 Ω/km;

  1,0 mm² : 18,5 Ω/km;

1,3 mm² : 14,2 Ω/km;

  1,5 mm² : 12,3 Ω/km.

 Insulation resistance (20° C) : min. 5000 MΩ/km. 

Mutual capacitance (1 kHz) : ≤ 4 pairs all other pairs

0,50 mm² : max. 100 pF/m, max. 65 pF/m;

0,75 mm² : max. 100 pF/m, max. 65 pF/m;

1,0 mm² : max. 100 pF/m, max. 65 pF/m;

1,3 mm² : max. 100 pF/m, max. 75 pF/m;

1,5 mm² : max. 100 pF/m, max. 75 pF/m. 

L/R (ratio) (max) : 0,50 mm² : 25 µH/Ω;

  0,75 mm² : 25 µH/Ω; 

1,0 mm² : 25 µH/Ω; 

1,3 mm² : 40 µH/Ω;

  1,5 mm² : 40 µH/Ω.

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Standards

 Design : DIN EN 50288-7.  

Conductor : IEC 60228 class 2; 

DIN EN 60228 class 2.

 Insulation : EN 50290-2-29.

 Inner/Outer sheath : EN 50290-2-22.

 Armour : EN 10257-1. 

Flame retardancy test : IEC 60332-1 & EN 60332-1. 

IEC 60332-3 & DIN EN 50266-2-4.

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Applications

 These cables are used for transmission of analogue and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc... .

Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.

With blue sheath it is suitable for intrinsically safe systems.

The armour above the inner sheath protects the cable from mechanical shocks.

These cables are recommended for direct burial.

They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

RE-2X(St)YSWAY-fl 90° C - CU/XLPE/OSCR/PVC/SWA/PVC  - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V