RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Construction

Conductor : plain copper wire, stranded.

 Insulation : XLPE compound, (RE-2X….). 

Core identification : black / white / red cores.

 Triple : triple conductors twisted to a triple.

Lay-up : triples laid up in layers of optimum pitch.

 Separator : polyester tape.

 Screen : AL-PES tape over tinned copper drain

wire 0,50 mm².

 Inner sheath : PVC compound.

 Armour : galvanized round steel wire.

 Outer sheath : PVC compound, UV and oil resistant.

Sheath colour : RAL 9005, grey or RAL 5015, blue.

More details

More info
Complete View / Download PDF

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Technical data and tests

Rated voltage : 500 V.

 Test voltage : Urms core-core : 2000 V;  

Urms core-screen : 2000 V.

 Temperature range : operation : - 30° C ~ + 70° C;

installation : - 5° C ~ + 50° C.

Min. bending radius : 10 x D.

 Capacitance unbalanced : (1 kHz) : max. 500 pF/500 m.

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Technical data and tests

 Conductor resistance (20° C) : 0,50 mm² : 36,7 Ω/km;

  0,75 mm² : 25,0 Ω/km;

  1,0 mm² : 18,5 Ω/km;

1,3 mm² : 14,2 Ω/km;

  1,5 mm² : 12,3 Ω/km.

 Insulation resistance (20° C) : min. 5000 MΩ/km

. Mutual capacitance (1 kHz) : ≤ 4 pairs all other pairs 

0,50 mm² : max. 100 pF/m, max. 65 pF/m;

0,75 mm² : max. 100 pF/m, max. 65 pF/m;

1,0 mm² : max. 100 pF/m, max. 65 pF/m;

1,3 mm² : max. 100 pF/m, max. 75 pF/m;

1,5 mm² : max. 100 pF/m, max. 75 pF/m. 

L/R (ratio) (max) : 0,50 mm² : 25 µH/Ω;

  0,75 mm² : 25 µH/Ω; 

1,0 mm² : 25 µH/Ω; 

1,3 mm² : 40 µH/Ω;

  1,5 mm² : 40 µH/Ω.

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Standards

Standard : DIN EN 50288-7.

 Conductor : IEC 60228 class 2, DIN EN 60228 class 2. 

Insulation : EN 50290-2-29. 

Inner sheath : EN 50290-2-22. 

Armour : EN 10257-1. 

Flame retardancy test : IEC 60332-1 & EN 60332-1.

Sunlight resistancec : UL 1581 section 1200.

Oil resistance : ICEA S-82-552.

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V

Applications

These cables are used for transmission of analogue and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroleum plants, etc... .

Instrumentation cables are not allowed for direct connection to a low impedance source, e.g. public mains electricity supply.

With blue sheath it is suitable for intrinsically safe systems.

The armour above the inner sheath protects the cable from mechanical shocks.

These cables are recommended for direct burial.

They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.

RE-2X(St)YSWAYÖ-uv-fl MT 70° C - CU/XLPE/OSCR/PVC/SWA/PVC - XLPE insulated, armoured, PVC sheathed instrumentation cable 500 V