+40 746 887 887
+40 236 319 085
office@halleycables.com

Categories

Home > Silicone & Heat Resistant>LISH(St)CSH-TIMF SPEC
 - High temperature (300° C) operating, halogen free, screened silicone connection cable
LISH(St)CSH-TIMF SPEC
 - High temperature (300° C) operating, halogen free, screened silicone connection cable Maximize

LISH(St)CSH-TIMF SPEC
 - High temperature (300° C) operating, halogen free, screened silicone connection cable

LISH(St)CSH-TIMF SPEC screened silicone cable -  Construction


Conductor            : flexible copper wires.
Insulation             : special silicone rubber compound, 300° C.
Core identification : white, blue, brown coloured cores.
PIMF construction : wrapping of polyester tape, with drain wire (7 wires), AL-PES tape and polyester tape wrapping.
Lay-up                 : TIMF laid up in layers of optimum pitch
Separator             : polyester tape.
Screen                 : with drain wire (7 wires) under the AL-PES tape.
Screen                 : braid of tinned copper wires, 65% coverage.
Separator             : polyester tape.
Outer sheath        : special silicone rubber compound, 300° C grade.
Sheath colour       : RAL 3000, red or RAL 2003, orange.

More details

LISH(St)CSH-TIMF SPEC screened silicone cable -  Technical data and tests

Rated voltage                       : 250 V (for peak voltage).      d/d : damar/damar 

Test voltage (AC 50 Hz)         : 1200 V.                               c/c : core/core

Insulation resistance              : min. 50 MΩ/km.

Mutual Capacitance (800 Hz)  : d/d-c/c max. 250 pF/m.

Inductance                           : ~ 0,67 Mh/km.
Impedance                           : ~ 80 Ω.

Temperature range               : fixed    : - 60° C ~ + 300° C;

                                            mobile  : - 25° C ~ + 250° C.

Min. bending radius              : fixed    :   8 x D;

                                            mobile  : 15 x D.
 
LISH(St)CSH-TIMF SPEC screened silicone cable -  Standards

Cable                        : VDE 0812 & VDE 0814 & VDE 0250. 

Conductor                 : IEC 60228 class 5, DIN EN 60228 class 5.

Flame retardance test : IEC 60332-1 & EN 50265-2-1;

                                  IEC 60332-3 & EN 50266-2-4.
 
LISH(St)CSH-TIMF SPEC screened silicone cable -  Applications
This halogen-free screened, silicone insulated cable is used where high temperatures can arise as well as for ambient air temperatures between –60° C and +300° C as control and connectiong cable.
It is used in instrumentation and control engineering, in industrial electronics, computers, information and transmission systems, office machines; data transmission cable for voice frequncy transmission.
This cable a higher resistance against tearing and tensile strength thank to its specially formulated silicone compound.
In case of fire, this cable inhibits the propagation of  flames and the development of smoke is extremely low.
No corrosive gases are emitted in the event of fire.
The individual screen consists of tinned copper wires and provides protection against external pulses.
It also has tinned copper drain wires for continuity of the individual screen and for earthing.
This cable is not intended for outdoor or underground installation.

All Rights Reserved Halley Cables © 2006 - 2024