+40 746 887 887
+40 236 319 085
office@halleycables.com

Categories

Home > Silicone & Heat Resistant>JE-SH(St)SH FE 180-E30/E90 Bd Z
 - Silicone sheathed cable with steel wire braiding
JE-SH(St)SH FE 180-E30/E90 Bd Z
 - Silicone sheathed cable with steel wire braiding Maximize

JE-SH(St)SH FE 180-E30/E90 Bd Z
 - Silicone sheathed cable with steel wire braiding

JE-SH(St)SH FE 180-E30/E90 Bd Z silicone sheathed cable - Construction
Conductor      : plain copper conductor.
Insulation       : special silicone rubber compound.
Pair               : two conductors twisted to a pair.
Bundle           : 4 pairs laid up to a bundle.
Lay-up           : bundles laid up in layers.
Separator       : polyester tape.
Screen           : tinned Cu drain wire under the AL-PES tape.
                       drain wire Ø 0,80 mm.
Lay-up           : cores laid up in layers of optimum pitch.
Outer sheath  : special silicone rubber compound.
Sheath colour : RAL 2009, orange or RAL 3000, red.

More details

JE-SH(St)SH FE 180-E30/E90 Bd Z silicone sheathed cable - Technical data and tests

Insulation resistance            : min. 100 MΩ/km.
Mutual capacitance (800 Hz) : max. 120 nF/km.  *
Capacity unbalanced (k)       : max. 200 pF/100 mt **
Operating voltage, peak       : max. 225 V.
Test voltage (AC 50 Hz)       : core/core    :   500 V;
                                           core/screen : 2000 V.
Temperature range             : fixed    : - 60° C ~ + 180° C;
                                          mobile  : - 25° C ~ + 180° C.
Min. bending radius            : fixed     :   4 x D;
                                          mobile  : 15 x D.
*   This value may be exceeded by 20% by cables with up to 4 pairs.

** 20% of the values, at least one value up to 400 pF permitted.
 
JE-SH(St)SH FE 180-E30/E90 Bd Z silicone sheathed cable - Standards

Cable                          : VDE 0250, DIN VDE 0815 (designed according to).

Core identification        : VDE 0815 (Z).

Flame retardance test   : IEC 60332-1 & EN 50265-2-1; IEC 60332-3 & EN 50266-2-4.
Insulation integrity       : IEC 60331, VDE 0472-814.
*Fire resistant with
  mechanical shock       : DIN EN 50200 ; PH 15 (15 min); PH 30 (30 min); PH 60 (60 min); PH 90 (90 min).
   
JE-SH(St)SH FE 180-E30/E90 Bd Z silicone sheathed cable - Applications

This fire proof and halogen free cable is used for control and power supply, on the basis of a fixed operating mode, can continue with the supply of power for a period of 180 minutes under existing fire conditions (750° C and exposed to flames).
Furthermore, this cable complies with EN 50200 test which is a fire resistant with mechancal shock test.
This is a cable used for industrial electronics, telecommunication, control, data engineering where low current consumptions are required and data transmision must be continuous in transmission systems, or processor-controlled equipment.
The screen protects against external pulses and ensures an interference-free transmission.
This cable is used at schools, airports, hospitals, etc. and in environments which have no corrosive gases emitted in the event of fire. 

All Rights Reserved Halley Cables © 2006 - 2024