+40 746 887 887
+40 236 319 085
office@halleycables.com

Categories

Home > Special>HDKE-Solar - Halogen free low voltage power cable for photovoltaic power supply systems (0.6/1 kV)
HDKE-Solar - Halogen free low voltage power cable for photovoltaic power supply systems (0.6/1 kV) Maximize

HDKE-Solar - Halogen free low voltage power cable for photovoltaic power supply systems (0.6/1 kV)

HDKE-Solar low voltage solar power cable 0.6/1 kV - Construction


1. Conductor   : annealed tinned copper round flexible class 5.

2. Insulation   : halogen free compound according to DKE 411.2.3.

3. Sheath       : halogen free compound according to DKE 411.2.3.

Core identif.   : black.

Sheath colour : black or red.

More details

HDKE-Solar low voltage solar power cable 0.6/1 kV - Technical data and tests
Rated voltage AC Uo/U (Umax)    : 0.6/1 (1.2) kV.
Rated voltage DC Umax              : 1.8 kV (conductor - conductor).
Nominal cross-section range        : 4 to 240 mm².
Ambient temperature range         : -40° C to +90° C.
Maximum conductor temperature : 120° C.
 
HDKE-Solar low voltage solar power cable 0.6/1 kV - Standards

Standard specification                     : DKE 411.2.3.

Conductor resistance                       : EN 50395-5.

Conductor construction                    : EN 60228.
AC voltage test                               : 6.5 kV  - No faults (EN 50395-6).

Measurement of ovality                    : ≤15% (EN 50396-4.4).

Surface resistance of sheath             : min 109 Ω (EN 50395-11).

Insulation resistance                        : min 1014 Ω/cm at 20° C, min 1011 Ω/cm at 90° C (EN 50395-8.2)

Long term resistance to DC              : DKE 411.2.3 Annex D.

Measurement of insulation thickness : EN 50396-4.1.

Measurement of sheath thickness     : EN 50396-4.2.

Measurement of overall diameter      : EN 50396-4.4.

Pressure test at high temperature     : EN 60811-3-1.

Damp heat test                               : EN 60068-2-78.

Resistance against acid and 

                       alkaline solution      : EN 60811-2-1-10.

Compatibility test                           : DKE 411.2.3 Annex A.

Cold impact test                             : DKE 411.2.3 Annex E.

Cold bending test                           : EN 60811-1-4-8.2, for cable diameter ≤ 12.5 mm.

Cold elongation test                        : EN 60811-1-4-8.4, for cable diameter >12.5 mm.

Ozone resistance                            : EN 50396-8.1.3.

Weathering/UV resistance test         : HD 605-2.4.20.

Dynamic penetration test                 : DKE 411.2.3 Annex F.

Notch propagation test                    : DKE 411.2.3 Annex G.

Shrinkage test                                : EN 60811-1-3-11.

Flame propagation                          : EN 60332-1-2.

Halogen content                             : DKE 411.2.3 Annex B.

Determination of halogens               : DKE 411.2.3 Annex C.
 
HDKE-Solar low voltage solar power cable 0.6/1 kV - Applications
Flexible, weather resistant power cable.
This cable is specially designed for the demanding applications in photovoltaic systems.
The optimal cable link between solar modules and between modules and the inverter.
It is suitable for rooftop and ground mounted systems, for rooftop and ground mounted systems; it can be laid outdoors, indoors and in pipe conducts.
Not suitable for direct burying in ground.
The cable is double insulated and therefore suitable for use in installations of safety class II.

All Rights Reserved Halley Cables © 2006 - 2024